Post by midwichcuckoo on Jan 5, 2017 16:00:42 GMT -5
I have a problem with two Exa 500's in that the shutter pawl peg doesn't quite go far enough to allow the pawl hook to latch over it when cocking the advance lever..... had nightmares about this after having spent six hours trying to resolve the problem yesterday 
so any advice or experience would be most welcome. Ironically, one of the cameras was actually functioning ok before I opened it to lube the curtain spindles so I'm doubly frustrated. I had posed this question on the tail end of older threads, so apologies if you've read this elsewhere. I've got a panagor 135mm and genuine aluminium Ihagee extension tubes and I'm desperate to get out and use them if I can sort this issue out. Many thanks in advance , Peter.
so any advice or experience would be most welcome. Ironically, one of the cameras was actually functioning ok before I opened it to lube the curtain spindles so I'm doubly frustrated. I had posed this question on the tail end of older threads, so apologies if you've read this elsewhere. I've got a panagor 135mm and genuine aluminium Ihagee extension tubes and I'm desperate to get out and use them if I can sort this issue out. Many thanks in advance , Peter.