|
Post by hannes on Feb 14, 2017 14:57:43 GMT -5
Hello:
I got a Jupiter 9 with sticky aperture blades. I dismantled and cleaned it in lighter fluid. Now I need to re grease it, which greese would you recomend?
I searched and these 2 are in the final round for my order:
Nye/Nyogel #744 or Helical #10 (S-10 or HG-10)
Alternative would be a teflon based grease for bikes
Any suggestions are welcome
Hannes
|
|
|
Post by hannes on Feb 14, 2017 17:19:12 GMT -5
Hi: Just to make it clear: I will not put oil or grease on the aperture blades, they are dry as a desert now. I'm searching for the right grease to put on the ring that moves the aperture mechanism And for the one for the focusing helicoil. I watched the videos on youtube showing how it goes. youtu.be/3_lRB6vXbP8?list=PL...olC1n4-C_g0hAQI mounted it up to minute 34 on the video, where the ring is mounted. The guy in the video does not put grease on this thread, but there was grease on mine. This part I did not start yet. Cleaning the focusing helicoil youtu.be/BliHEJ3-P1I?list=PL...olC1n4-C_g0hAQ
|
|