Konica & Fujica

[John Parry]

Have got film in both my Konica Autoreflex T3 and Fujica AZ1 now. Put SR44s into both, but I read a report stating that both were susceptible to battery voltage problems.

Anyone else had trouble with these? (I'm not worried to a stop or so). Surprised about the AZ-1 though, as there are some quite sophisticated electronics in there to give the Auto function.

Regards - John

[vintageslrs]

John

The Konica T3 is calibrated for the 1.35 volt battery.
You are using a 1.5 volt battery I assume...so unless you wish to have it converted to use the 1.5 battery (Greg Weber can do it for you).....you can just set the asa setting on the camera to approx. 50% of the speed of your film used. Example.....for 100 asa film set the camera for 50. And you should be just fine.

Bob