|
Post by dennis0311 on Feb 17, 2015 21:41:48 GMT -5
I had to do an adjustment to the meter on the SRT. I took off the bottom cover an adjusted the resistor. Now the meter matches my other SRT and a Pentax. My problem is when I got the meter set right it threw off the BC (battery check). So I adjusted the other resistor for the battery. The needle will not come down far enough on the BC. It is way above what it should read. Is it possible that I messed up the resistor? Good thing is the meter is now accurate(-:
|
|
|
Post by philbirch on Feb 18, 2015 14:30:11 GMT -5
I wouldnt worry about the BC. Look where the needle points with fresh batteries and use that as your reference point. Don't know about the resistor though. Still it seems that the camera is working fine now. More than mine is!
|
|
Stephen
Lifetime Member
Still collecting.......
Posts: 2,718
|
Post by Stephen on Feb 18, 2015 19:00:40 GMT -5
Don't forget that some resistors have a wide tolerance, +/-20%, may pay to check value with good meter. stephen.
|
|