|
Post by wilwahabri on Nov 19, 2021 9:00:39 GMT -5
I have an Exakta RTL 1000 TTL metering prism that is not working.
I am willing to be corrosion has caused failure of the supply wiring, however I cannot figure out how to take the case apart.
I have removed the leathercloth from the top, removed the three screws and the top is definitely free, however the extended spindle that attached to the shutter dial on the camera is preventing the top cover's complete removal.
Has anyone any experience of getting into one of these devices? I would appreciate guidance or even better a service manual for the TTL Prism
Bill
|
|